Cristalplus 500 FSR - COD. 8722
Transparent PVC resin film wih a low thermal conductivity, ideal to protect dehors and outdoor structures by wind and rain. Uv resistant tested for 1000 hours according to ISO 4892 3 without yellowing (corresponding to at least 2 years of vertical exposureto sun). Its compound guarantees an adequate resistance enablingits application on big structures or on electric motor systems. A feature of this material, being a thermoplastic film, is a sight shrinkage occurring once unrolled and caused by tensioning during rolling, temperature and adjustment of the material. This is to bepre-emptively considered while projecting application on slidingrail systems or structures withzipper The FSR version is already stabilized during productionso that the shrinkage caused by the natural structure of the fil and the environmental conditions are reduced to > 1%. Non flame etardant.
Excellent transparency, low cohesion formula to avoid excessive adhesion of the film and faciitate unrolling. Available kinds of stiffness: - 1s film wih higher stiffness - 2s film wih medium flexibiity - 3s softer and more elastic Cristalplus 500 Window is a version with printed window squares, inner size of the square is 25x24 cm, thickness of the line measures1 cm (+/- 5%). Charcoal film: fiin a charcoal shade version fora higher sun shield and shading effect. For these two qualities,flame etardant versions are available.All CRISTALPLUS PVC films ae produced according to the European product regulations concerning dangerous chemical substances as Regulation 1907/2006 named REACH.
Ideal for sides of pergolas, vertical roll up sides, windows for tents, gazebo and tension structures.
Care and cleaning
To Remove heavy dirt and dust,a specific poduct like APCO CRISTAL PLUS CLEANER is suggested. After cleaning, application of an anti-adhesion protectant like APCO CRISTALPLUS LUBRILUX is advisable. LUBRILUX lubricates the surface of the film and estores the low cohesion layer. Use a soft cloth or brush; do not use aggressive substances or facilitiesand avoid acid or basic oxidizers ashypochlorite or hydrogen peroxide.It is allowed to use low pressure water jet cleaner with cold water. Rinse and let both surfaces dry completely before rolling up and storing the cover. Occasional stains on the surface may be caused by residual humidity and they usually disappear after a few hour outdoor in the sun.