Cristalplus 500 1S - COD. 8707
Transparent PVC resin film wih a low thermal conductivity, ideal to protect dehors and outdoor structures by wind and rain.Uv resistant tested for 1000 hours according to ISO 4892 3 without yellowing (corresponding to at least 2 years of vertical exposure to sun). Its compound guarantees an adequate resistance enabling its application on big structures or on electric motor systems. A feature of this material, being a thermoplastic film, is a sight shrinkage occurring once unrolled and caused by tensioning during rolling, temperature and adjustment of the material. This is to be pre-emptively considered while projecting application on sliding rail systems or structures with zipper.
Excellent transparency,Low cohesion formula to avoid excessive adhesion of the fil and facilitate unrolling Available kinds of stiffness:- 1s film with higher stiffness- 2s film with medium flexibility- 3s softer and more elasticFire retardant versions are available in compliance with Italian CL.1or CL 2 (UNI 9177 Italy), French M2 (NFP92 507 France) standards. Cristalplus 500 Window is a version with printed window squares, inner size of the square is 25x24 cm, thickness of the line measures1 cm (+/- 5%). Charcoal film: fiim a charcoal shade version fora higher sun shield and shading effect. All CRISTALPLUS PVC filmare produced according to the European product regulations concerning dangerous chemical substances as Regulation 1907/2006 named Reach.
Ideal for sides of pergolas, vertical roll up sides, windows for tents, gazebo and tension-structures.
Care and cleaning
To Remove heavy dirt and dust, a specific product like APCO CRISTAL PLUS CLEANER is suggested. After cleaning, application of an anti-adhesion protectant like APCO CRISTALPLUS LUBRILUX is advisable. LUBRILUX lubricates the surface of the film and estores the low cohesion layer.Use a soft cloth or brush; do not use aggressive substances or facilities and avoid acid or basic oxidizers as hypochlorite or hydrogen peroxide. It is allowed to use low pressure water jet cleaner with cold water. Rinse and let both surfaces dry completely before rolling up and storing the cover. Occasional stains on the surface may be caused by residual humidity and they usually disappear after a few hour outdoor in the sun.