CARE & CLEANING
Outdoor exposure, pollution, resins, mildew, saltiness or whatever can affect your awningcan be forgotten with one quick wipe. IRISUN APCO CARE & CLEANING is a wide, powerful, efficient, technologically tested and complete range of products that offers an immediate result improving the durability of the fabric and renewing the appearance of the awning.
• Clean the exposed surface every 3 or 4 months;
• Rub the internal side with a soft sponge soaked with water and cleaner;
• Use an absorbent cloth to remove traces of oil or grease;
• After each washing rinse the awning with water;
• Avoid any contact with solvents, ammonia or any product containing these chemicals;
• Extend the life of your awning by protecting it from effects of saltiness, pollution, resins and mildews. The specific products IRISUN® APCO help maintaining the original features of the fabric and its natural elasticity.
APCO FAST CLEANER and APCO INTENSE CLEANER are in compliance with the biodegradability criteria based on the EC regulation (no. 648/2004) about cleaners. APCO CARE & CLEANING Protectants are biodegradable. Please follow the instructions for use and cautions indicated on the bottle, especially for daily and professional use. Safety data sheets for each IRISUN APCO CARE & CLEANING product are available upon request. All APCO CARE & CLEANING products are Reach-compliant.
DOWNLOAD PDF APCO CARE &CLEANING
TEXOUT APCO INTENSE CLEANER
Highly concentrated cleaner.
This multipurpose product penetrates and breaks up embedded heavy soil for more effective cleaning of all PVC fabrics. TEXOUT APCO INTENSE CLEANER contains a special combinationof cleaning agents, optical brighteners removing all soils,ensuring quick drying as well as a smooth and glossy surface.
TEXOUT APCO INTENSE CLEANER can be used concentrated or diluted from 2 to 5% with water. Apply with a soft spongeor cloth. Let it dry until soils are completely soaked and then rinse. Repeat the application and increase concentrationto up to 100% in case of heavy soil. It is ideal for pressure waterjet cleaners. Let the fabric dry and then rub with dry clothto polish the surface. The average consumption is approximately 25-30 ml/m2 depending on the fabric and degree of dirt.
Spray no-gas: 0.75 l (approx. 25/30 m²) Tank: 5 l (approx. 166/200 m²).
TEXOUT APCO FAST CLEANER
This fast cleaner is ideal to remove any kinds of soil fromPCV materials. TEXOUT APCO FAST CLEANER removes oxidation determining the loss in elasticity of all vinyl surfaces.It is effective to gradually dissolve ink, oily soil and stains coming from outdoor exposure. TEXOUT APCO FAST CLEANER gives back the fabric its original look and finishing, especialyif combined with TEXOUT® APCO PROTECTANT.
Ready to use. Spray from a distance of about 25 cm and then rub dry with a cloth. Do not rinse. Repeat the applicationif necessary. The average consumption is approximately25-30 ml/m2 depending on the fabric and degree of dirt.
Spray no-gas: 0.75 l (ca. 25/30 m²)Tank: 5 l (ca. 166/200 m²).
TEXOUT APCO PROTECTANT
Longlasting self-polishing protectant for rubber and PVC surfaces. It protects materials from wearout and containsUV inhibitors. It does not affect colour fastness and does not create any kind of thick layer. TEXOUT® APCO PROTECTANTis easy to apply, dries quickly and provides anti-slip effect.It does not require polishing.
Ready to use. Spray all over the surface. In case of heavy soil, it is advisable to clean the fabric first wih TEXOUT APCO CLEANER or TEXOUT APCO FAST CLEANER. Apply TEXOUT APCO PROTECTANT evenly on a perfecty dry and cold surface and let it dry. Repeat the application if necessary. The product, once dried, leaves a film on he material protecting it from damages due to outdoor exposure as well as dirt and renovates brightness. The average consumption is approximately25-30 ml/m2 depending on the fabric and degree of dirt.
Spray no-gas: 0.75 l (approx. 25/30 m²)Tank: 5 l (approx. 166/200 m²).
TEXOUT APCO CRISTAL CLEANER
Transparent PVC gentle cleaner.
This special cleaner is studied to clean transparent PVC of all kinds in a very short time without the need of wateror without compromising any transparency.
Spray the product homogeneously on the Cristal, rub lightlyand remove with a cotton cloth. For a better result a usageof 25-30 ml per square meter is prescribed.
Spray no-gas: 0.75 lTank: 5 l
TEXOUT APCO LUBRILUX
Anti- adhesion and odorless protectant for transparent PVC.
Lubrilux is a specific water soluion polymer preventing self-adhesion of the film This poduct is studied in the GIOVANARDI Quality control lab and the result is an innovative protectant for transparent PVC films. The paricular anti adhesion formula preserves all the transparency features and the functionalityof the system. This makes Apco LUBRILUX ideal for the careof the rolling systems all year long. It is compliant with the REACH regulation.
Spray the product homogeneously on a clean surface and remove again with a soft, dry cloth (cotton). For a better result, consider a usage of 25-30 ml per square meter.